Specification - Mfr Part Number: 761345-26500-3 (SP-500)
- Features:
- Dual 80mm fans in flow-through configuration
- Unique Dual Fans Design: The external exhaust fan starts, stops and adjusts its speed in response to system temperature, while the other fan is temperature-regulated
- Dual +12V output circuitry for stability and safety
- Advanced Cable Management system allows you to use only the cables that are needed
- Serial ATA connectors
- PCI-E graphics card connector
- Switches: ATX Logic on-off; Additional power rocker switch
- Maximum Power: 500 W
- Transient Response: +5V,+12V and 3.3V outputs return to within 5% in less than 1ms for 20% load change.
- P. G. Signal: 100 ~ 500 ms
- Over Voltage Protection (recycle AC to reset): +5V trip point < +6.2V; +3.3V trip point < +4.1V; +12V trip point < +14.3V
- Special Connectors: ATX12V; 3-pin Fan Sensor; SATA; PCI Express
- Leakage Current: <3.5mA @ 115VAC
- Input:
- Input Voltage: 100 ~ 240 Vac ±10%
- Input Frequency Range: 47 ~ 63 Hz
- Inrush Current: 640A @ 115V; 100A @ 230V
- Input Current: 12A @ 115V, 6A @ 230V
- Hold-up Time: 20ms at full load
- Efficiency: 70%(min.) at full and typical loads, 115V/230Vac
- EMI/RFI: FCC Class B
- Output:
- +5V, +12V1, 12V2 and +3.3V maxload: 480 Watts
- +5V and +3.3V combined output: 180 Watts
- Fan: 2x 80mm fans
- Connectors: 24/20/6/4 pins; 4x SATA Connectors; PCI-Express Graphic Connector (SLI Approved)
- MTBF: 80,000 hours at 25°C
- Safety Approval: TUV, UL, CUL, CE, CB, FCC
- Dimension (WxDxH): 5.9 x 6.1 x 3.4 inch / 14.9 x 15.8 x 8.5 cm
- Weight: 5 lbs / 2.3 kg
|
